truesourcesoftware.com
  • Home
  • Technology
  • About Us
  • Contact Us
  • Resource
  • Terms of Service
  • Write for Us
Home - Archives for Stanley - Page 7
Author

Stanley

Stanley

Press Brake
Manufacturing

How Can I Go About Modernizing My Old Press Brake?

by Stanley October 22, 2019
written by Stanley

If you already own an old press brake and aren’t sure about what to do with it we’ll give you options on how to go about it. If you want to get rid of it by selling it then upgrading to a newer model that’s totally fine. Alternatively, you could consider retrofitting the old press brake with features that minimize set-up time, wastage, and generally boost production. This increases the machine’s productivity.

Press Brake

How To Modernize An Old Press Brake

Replacing an old press brake can be quite expensive and so retrofitting it seems like the next most sensible thing to do. The points we have listed below should help you assess the condition of your old press brake and decide your next move:

  1. Evaluate the condition of the machine and its components

The four main considerations that you need to focus on are RAM, pedestal control, back-gauge control, and press-brake control. Check whether or not the RAM is consistent, accurate and level on both sides. Is the pedestal control still functional? Does the back-gauge control need to be replaced?

  1. Know what you are working with

You should also focus on the type of machine you’re using. Is it hydraulic, electric, mechanical, or CNC?

The type of press brake will determine is its controls can be interfaced to give better speed and a programmable position.

  1. Access the pain points

What are the real problems that you are facing? To determine this, you need to determine which method between front-gauging or back-gauging will work best for you. The dimensions that are the most important determine which one between the two is the right method.

When looking at the options you have available, remember that even though advanced controls can bring huge benefits, one needs to plan well before implementation.

  1. Determine the right approach

The most appropriate approach depends on the size of the back-gauge system and the machine’s control capabilities. The retrofit company will do a better job if you tell them more about the use for which the press brake will be put.

When it comes to the control capabilities, the more sophisticated, the better the benefits. However, these will need more front-end planning.

 

Press Brake

 

  1. Implement a solution

If the press brake is functional and you just want to add productivity to your bending process, here are your options:

  • Leave the machine as it is
  • Retrofit a complete system or just the controls

If the press brake is not functioning well, the first thing to do is find out how much money you are going to need to retrofit it so that it becomes functional again. Afterward, find out how much productivity-boosting upgrades are going to cost you. Weigh your options and then decide what the most sensible option for your business is.

Either way, choosing to retrofit is a very informed way of increasing productivity at your business premises. It’s smart and cost-effective.

 

 

 

October 22, 2019 0 comment
0 FacebookTwitterPinterestEmail
3 LED lights
Electronic product

Benefits attained by the use of LED lights

by Stanley August 28, 2019
written by Stanley

Comparatively, the use of LED lights has significantly increased in the recent past compared to traditional lighting. The increase in question is as a result of various advantages one enjoys after using the LED lamp. At XSY Lighting, several designs of modern LED lights that can give you a good value of your money are available. The article will discuss some of the benefits you can enjoy by using the LED lights.

  1. Energy efficient

One of the energy benefits of LED lighting is efficient power consumption. Comparatively, the lighting in question is 80% more effective than the traditional lighting. In LED lighting, 95% of the consumed energy is converted to light, and the remaining 5% is converted to heat. Consequently, LED lighting becomes more cost-effective than traditional lighting.

  1. Longer lifespan

The LED lights are made of a stronger material, thus making them less breakable. As a result, they can endure rough conditions, unlike the other lamp types. Consequently, durability becomes one of the primary benefits of LED tubes since one bulb can be used for a relatively long duration. As a result, it helps in cost reduction since a replacement required is less frequent.

a lot of LED light

  1. Design flexibility

Unquestionably, fashion and design have dramatically improved the modern world. Subsequently, the LED lights are designed in various styles, giving the consumers a wide variety of choices. As a result, most individuals prefer using LED lights in their homes and offices over the traditional ones. Additionally, the lamp in question can be customized according to the client’s preferences.

  1. Dimming capability

The dimming capability is one of the unique benefits of LED tube lights. Some LED lamps are designed with a feature that enables them to operate on any power percentage, from zero to 100% depending on the user’s preference. The characteristic in question gives the user a regulating power to decide the amount of light that suits them best. As a result, the amount of energy consumed can be reduced by setting a low percentage of power consumption, hence reducing the cost.

  1. Frequent switching and instant lighting

Indisputably, LED light bulbs are capable of having a series of on and off lighting cycles repeatedly. Similarly, the lighting can be done in different colors, thus making it more entertaining. Besides, the bulbs in question can also give instant light, thus making it multipurpose.

  1. Ecologically friendly

3 LED lights

Certainly, this is one of the most significant benefits of LED lighting on the environment. The lamp in question do not have any toxic elements, thus doesn’t pollute the environment on disposal. As a result, it becomes more eco-friendly.

In conclusion,

Generally, LED lights are highly advanced, thus having several advantages to the user. Energy efficiency, longer lifespan, and the dimming capability help you to cut on cost. Additionally, design flexibility and frequency switching enable you to have your desired design and lighting rhythm. Also, the LED bulbs are ecologically friendly, therefore creating lesser pollution.

 

 

August 28, 2019 0 comment
0 FacebookTwitterPinterestEmail
e-cigs industry
Electronic product

2019 Prominent Trends In The E-cigs Industry

by Stanley August 27, 2019
written by Stanley

The vaping industry is vastly growing and more people are becoming consumers. Approximately 2 in 5 smokers are vapers.  While 2018 was a significant year for the e-cigs industry, 2019 has welcomed a few new trends that need to be recognized. Here are some of the things professionals have witnessed in the sector of unique e-cigs.

e-cigs industry

  1. Production And Smartphone Integration

Vaping is a significant social practice that has taken over the sector of e-cigs in different ways. With that said, e-cigarettes and smartphones seem to have taken over the industry. Further moves have been made to manufacture premier vaporizers that have Bluetooth apps. These can be used in downloading on the smartphone.

 

  1. More People Are Switching To Vaping

In 2018, there was significant confusion regarding basic knowledge of vaping. Today, most people have taken up lessons regarding vaping and the health benefits appended to it. Therefore, it’s viable to conclude that the vaping sector is vastly developing into a massive industry since most people have garnered more knowledge about the basics of vaping.

 

  1. There Are More Online Retailers In The Vaping Sector

Although the vaping industry is approximately 12 years old or so, there are many vaping retailers penetrating the market. 2019 has welcomed more online retailers who have also garnered more clients. This trend is expected to continue into 2020.

 

  1. Cost-Effectiveness

The e-cigs sector currently offers disposable models of vape pens coupled with new cartridge models. These elements are rechargeable. They also contain filled cartridges that are reasonably affordable. Other than that, they are known to be beneficial. This is compared to conventional cigarettes.

 

  1. The Rise In Demand Of Vape Products

The vaping industry is quickly growing. It’s also gaining immense popularity. Multiple vendors are coming in to introduce the next line of various vaping products, including vape pens, smoke vapes, and reduced risk products. This makes it possible for manufacturers to come up with additional products that can support the well-being of consumers.

 

  1. Young Entrepreneurs Are Taking Over The Vaping Sector

Currently, the vaping industry has several remarkable features, including being driven by young business professionals who happen to be emerging entrepreneurs. These individuals are responding to the rising demand for vaping consumers.

 

  1. Vapes Are Pretty Affordable In The Current Year

The legal age for vapers is about 18. However, it does not imply that teens should stop indulging. About the money used to purchase vaping products, the cost of indulging in conventional smoking is pretty high. For a teen that cannot afford such cigarettes, vaping is the best option.

 

  1. A Look At The Component Insights

The vaping industry has been experiencing an influx of vape mod segment. The sector is still expected to uphold its massive dominance over the next few months. As such, the availability of these vaping products has also led to a rise in the demand for e-cigarettes.

 

Take-Home

Vaping is a healthier alternative to the common conventional smoking. It’s a new practice in the consumer sector.  Those who intend to join the business should be aware of the common trends in the sector.

 

 

August 27, 2019 0 comment
0 FacebookTwitterPinterestEmail
Server For Your Business
Uncategorized

Getting The Right Server For Your Business

by Stanley August 9, 2019
written by Stanley

When a small business scales beyond four people, it’s highly likely that the owner should purchase a server.  Depending on the current context of the business, the term server is used to refer to software or hardware and the functionality of a business. As with any other equipment purchase, you should start with the question of what issue you’d like to solve. For that reason, server rack manufacturers give insights regarding the right server for your business.

 

  1. Is It Physical Or Cloud-based?

Server For Your Business

One of the first things you need to consider when looking for a server for your business is if the site is accessed through the cloud. The driver of the decision is certainly going to be its cost. With that said, for most small businesses found in the locality, space servers seem to be slightly expensive. This is because security is required to issue protection. Therefore, the cloud will open up reliable opportunities to save when it comes to budgeting.

 

  1. Determine The Physical Shape Of The Server

A physical server comes in various types namely tower, blade, in addition to the rack. Selecting the right one for your office might seem challenging, but the decision depends on the size of the firm. For instance, a small business that has about 20 employees is best off with a few numbers of tower servers because they are the cheapest option. Other than that, they do not need specialized cooling systems.

 

  1. Should You Virtualize?

Virtualization is another branch of the server technology. This usually involves utilizing a single server such as the Hypervisor. The device creates multiple virtual machines while splitting the memory and processor power. This provides the IT departments with sufficient time to create a revolutionary virtual server in a few minutes. In the real sense, you can use this server set up to create another virtual server in a few minutes.

 

Server For Your Business

 

  1. Should You Go For Premade Or Personally Tailored?

One additional choice you should make lies in whether you should go for a premade server or buy the components by yourself? There are certain benefits appended to tailoring the server. For instance, the IT department understands the needed technology. However, the decision is affixed to your preferences. Other than that, can you control the costs involved?

 

  1. How Your Server Determines Its Function

A business server accomplishes various tasks. Some hardware specifications can also be useful in specific tasks. At that level, a business server profoundly shares a lot in common with the standard PC. Therefore, it’s essential to think of these servers as computers that can dish out various resources for different computers.

 

Conclusion

As a business owner, you should understand the basics of virtualization.  The process eliminates the requirement for incorporating physical servers. It also plays a role in getting rid of the need for cooling and backup. With that said, if you’re looking for a server for your small business, the points above should be helpful.

 

 

 

August 9, 2019 0 comment
0 FacebookTwitterPinterestEmail
automatic recirculation valve
Uncategorized

How automatic recirculation valve work

by Stanley July 19, 2019
written by Stanley

All the advances in technology also lead to plenty of improvements in the world of piping since it’s extremely important to ensure the same flow at all times. The pumps used are quite sensitive to overheating and that’s why you need to know everything about automatic recirculation valve in order to keep the piping working in a safe manner.

 

automatic recirculation valve

 

1.    Why is an automatic recirculation valve needed?

 

As it has been said before, centrifugal pumps are still rather sensitive since they don’t get replaced very often. They are prone to cavitation as well which can be very dangerous since it may cause the pump to burst.

Automatic recirculation valve is, in fact, there to ensure that the minimum flow exists in the centrifugal pump. This kind of valve actually represents a pump recirculation control valve that primarily prolongs the life of centrifugal pumps.

 

2.    How to operate an automatic recirculation valve?

 

Operating automatic recirculation valve might be challenging since you must pay a lot of attention to the pressure. If the automatic recirculation valve’s disc is at its full capacity, it will result in the reduction of the flow. However, when the capacity is low, the flow rate increases rapidly.

What’s interesting to know is that at this point the disc of the automatic recirculation valve lifts which means that recirculation flow is higher but the flow through the pump is lower. Since the process is quite complex, it is essential to close the disc in order to avoid accidental damage of the centrifugal pump and for automatic recirculation valve pressure drop.

 

automatic recirculation valve

3.    How to install an automatic recirculation valve?

 

ARC pump is not easy to install and therefore, make sure you hire an expert since pump minimum flow protection is a complex process. However, what every expert should know is that the best place to install an automatic recirculation valve is on the outer side of the centrifugal pump.

In order to complete the installation, you can use either your own hands or a tackle. On the other hand, before doing anything, you must make sure that there is absolutely no pressure in the system whatsoever because you can get hurt very easily. Additionally, all the pumps must be turned off.

Moreover, it is best to close all isolating valves and remove flange covers. What you must write down though is the unique number of the valve since that’s the only number you will use in case you need some spare parts for your automatic recirculation valve.

 

4.    Why is an automatic recirculation valve useful?

 

If you are looking for the pros and cons of a hot water recirculating pump, there are more pros than cons. Today, we have smart homes so why wouldn’t we have a smart hot water recirculating pump since it can save our time and money. Having hot water as soon as you turn on the faucet sounds amazing especially if you are in a hurry.

That’s why an automatic recirculation valve is necessary, but don’t forget to hire an expert to install it in order to avoid any dangerous situations that might be caused by wrong operations.

 

automatic recirculation valve

July 19, 2019 0 comment
0 FacebookTwitterPinterestEmail
using wax vaporizer pen
Electronic product

Step by Step Guide To Maintaining the Best Wax Vaporizer Pen

by Stanley July 12, 2019
written by Stanley

Proper maintenance of your wax vaporizer extends its life (service life span). In the light of cleaning your vaporizer, you prevent clogged airways, faulty connections and uneven heating of the wax in the vaporizer. You have to clean the atomizer of the best wax vaporizer pen to enhance the performance of the pen.

Here are simple steps you can follow at home to clean and maintain your vaporizer.

  1. Follow The Proper Charging Schedule

Every battery gets fully charged after a specified amount of time. Therefore, it is important to follow manufacturers guide on the charging of your vaporizer pen battery. Overcharging the battery could lead to a short lifespan and uneven heating of the wax.

Also, charge the battery before complete depletion of the charge, check whether the battery is bloated and whether its skin is peeled off.

  1. Turn Your Vaporizer Off Whenever Your Not It

As small as the best pen for smoking wax is, it can cause explosions and burns when left on particularly a portable vaporizer. Also, avoid pressing the power button for too long because the longer you press the button, the heat moves to the atomizer which can fire up. So, if you are not using the best wax vaporizer pen, turn off the control power button.

  1. Clean Between Atomizer And The Vaporizer

You can immerse a cloth in isopropyl alcohol and clean the threading where you connect the vaporizer and the atomizer. Ensure you don’t leave any piece of cloth on the threading because it will interrupt the connection between the two and can cause some working faultiness. Also, pat-dry the connections before reconnecting the atomizer to the vape pen for wax.

Additionally, you can submerge the atomizer in alcohol for 30 minutes to dilute the sticky wax. After immersing the atomizer, it is easy to pat dry all the wax.

wax vaporizer pen

  1. Burn Off The Remaining Wax In The Atomizer

An atomizer can have two to four coils on the inside, but you can also find a coil-less atomizer. So, if you’re are using a coiled atomizer and you have depleted your wax turn the atomizer to the highest temperature and burn off the wax on the attached on the coil.

It is a fast way of cleaning the best vape pen for wax because you burn off the wax before it gets attached to the coil.

  1. Clear The Air Holes

When you overfill the wax, it flows to the air holes through which the vapor should pass through. The overflowing wax clogs the air hole and prevents enough vapor from passing through.

Blow air through the mouthpiece to unclog the air hole but ensure the wax vaporizer is completely cold before you blow the air. Also, you can use a dab tool or paper clip which you pass through the mouthpiece and turn the tool as you wipe off the wax blocking the air holes.

Take Away

Regular maintenance of the best wax vaporizer pen prolongs its life. Clean the wax vaporizer after every use to prevent the accumulation of the wax on the coils, which will be tedious to remove in case you lack alcohol.

 

 

July 12, 2019 0 comment
0 FacebookTwitterPinterestEmail
HDD machine
Uncategorized

6 Factors to Consider Before Purchasing Horizontal Directional Drilling Machine

by Stanley July 10, 2019
written by Stanley

There is an increase in construction projects, which is why buying new construction equipment is essential. Buying an old machine is okay until it starts giving you troubles by requiring constant maintenance and part replacement.

If you have a long term project, it’s better to buy a new machine than an old machine. The first thing to remember is to order your equipment from a reliable source. One of the construction equipment is ZLCONN HDD machine which is manufactured and assembled by its ZL Conn Company.

Here are key points to mull over before buying a horizontal directional drilling machine.

  1. Quality

There is a common phrase; quality is key. It’s better to spend extra money on an HDD machine that is of quality than spend less on a bad quality machine. The quality of a machine determines the safety of your employees and work quality.

If the machine fails to reach the optimal threshold, it will degenerate quickly under harsh conditions, which will then lead to your employee working with compromised equipment. It is therefore essential for horizontal directional drilling companies to take into account the quality of the HDD machine before purchasing.

horizontal directional drilling machine's quality

  1. Cost

Construction equipment is generally expensive. But, it’s better to buy the equipment at a costly price, but they will last through your infrastructure project. However, check on the horizontal directional drilling price list and acquire relevant information on the prices of the HDD before purchasing the equipment.

  1. Technology

Technology is a friend of a business person. It has enhanced the efficiency of work. Choose a horizontal directional drilling machine that is built with the latest technology because it will require less manpower, and your company will spend less time completing construction projects.

 

Secondly, as it was mention earlier, construction equipment is costly. So, some companies can’t afford it, especially if the company is starting up. But, such construction companies will hire your machine because they know it’s built with the latest technology.

  1. Fuel Consumption

HDD consumes fuel as it operates. So, when choosing an HDD, consider the fuel consumption rate because fuel consumption can increase operation price in the long run.

  1. Do You Know How To Use The HDD?

Working in a construction site is hazardous if the person handling machinery lacks expertise and experience. So, before purchasing a horizontal directional drilling machine, invest in training persons that will be operating the machine. Besides, who will aid you in deciding on HDD machine specifications?

  1. Supplier

HDD machine

Is the supplier the same as the original HDD drilling machine manufacturer, or is he a middleman? Whichever answer it is, the supplier should answer your questions correctly. The answer should determine whether the supplier is reputable and reliable or if he is just in the market to make money. If he is running his business to make money, it means, when you encounter machinery problems, he won’t be of much help.

Conclusion

Buying a new HDD machine is advantageous in the long run because it will operate for a long time before you need to service it. But consider all the necessary tips and don’t compromise. They will determine whether you’re going to acquire a machine that will give value to the amount you’re spent buying it.

 

July 10, 2019 0 comment
0 FacebookTwitterPinterestEmail
steel fermenters 1
Manufacturing

Methods of controlling temperature of your steel fermenters

by Stanley June 13, 2019
written by Stanley

Controlling the temperature of stainless steel fermenter conical can have a significant impact on brewed beer. Fermenting above or below the optimal temperature range can lead to the production of fruity flavored beer or bitter beer. Without temperature control for your stainless steel fermenter, it is impossible to brew your beer correctly.

It’s essential to find means of controlling the temperature of your stainless steel fermenter. So, here are several techniques you can use to manage the temperature of steel fermenters.

  1. Ice Bath

Ice bathing technique involves submerging your small conical fermenter into a tub full of ice. You will be required to buy an ice maker but if you’re on a tight budget, consider using bottle frozen water. Frozen bottled water is recommended because it doesn’t melt fast as compared to ice cubes. For added effectiveness, place a towel in the tub before submerging the steel fermenter.

  1. Brew Belt

Brew belt is an electric device that you wrap around your fermenters. To use it, you plug into electricity and heat the steel fermenter to a temperature slightly above the room temperature. Additionally, you can install a temperature sensor inside the fermenter, which removes the brew belt once the temperatures are optimal.

Also, you can stick a thermometer beside the small conical fermenter to determine whether to move the belt up or down the fermenter.

steel fermenters 1

  1. Space Heater

This is a way of heating the temperature in the room where you’ve placed your steel fermenter. The heating speed is slow, but the gradual rise of temperature increases the temperature of your beer. Therefore, it is an excellent method of controlling a stainless steel wine fermenter as it doesn’t require high temperatures.

Fortunately, space heaters are manufactured to switch off automatically to prevent fires. It’s important to note; you can’t use it without close supervision.

  1. Use Fridge Or Freezer

The advantage of using a refrigerator is its insulation, which helps in maintaining a consistent temperature. To cool it down, plug in until it is set to your desired temperature. However, if you need to increase temperature, use a space heater to attain your desired temp.

Additionally, you can place conical fermenter with temperature control in the fridge. The insulation advantage of the refrigerator helps maintain the optimal temp.

  1. Evaporation

The evaporation process is used on the small conical fermenter. Why? You have to wrap an old shirt or towel around it, which means you can’t cover a large steel fermenter. It provides a constant cooling effect, but if you need to increase its effectiveness, add a fan.

Wrap Up

Fermentation temperature control is a significant determinant of your beer flavor. Although your beer will ferment fast in warm temperature, the taste might be awful. It’s not arguable you want the best-tasting wine and beer; a drink that you rank as world finest. Therefore, invest in several temperature control for your steel fermenter.

steel fermenters 3

 

June 13, 2019 0 comment
0 FacebookTwitterPinterestEmail
outdoor LED screen 2
Electronic product

5 Key Factors to Consider When Investing In an Outdoor LED Screen

by Stanley May 16, 2019
written by Stanley

To succeed as an event’s organizer for weddings, concert, company events and other social events; investing in a stage LED screen is imperative. Outdoor LED screens allow the showcasing of specific elements in an event, making it the highlight of the show.  As expected, looking at the various screen size, prices and installation process is the main focus when looking for a suitable display screen. However, to ensure you get the best, below are commonly overlooked factors while investing in outdoor LED screens.

  1. Outdoor LED Screen Storage Temp

Whether you will focus on LED screens for churches, weddings or corporate events considering the storage temperature of the LED screen is essential. Often high temperature leads to overheating of circuit boards in various devices leading to malfunction of the screen and a shortened life span. Ensuring that you invest in a display screen that allows you to store it without expensive adjustments is imperative.

  1. Outdoor LED Screen Storage Humidity

As you will be transporting the screen from one event to another, keeping in mind, the storage humidity levels will help you take better care of your display screen. This is especially important as damage to screens usually occurs in transit and hence the need to factor in the various methods for transportation and how humid the environs will be.

  1. Outdoor LED Screen Operating Temperature

Whether you invest in a flexible led stage screen or a fixed LED screen, consider the operating temperature the LED screen can withstand. The thermal ability of a screen is especially important when you are planning to operate screen for long hours. a suitable screen will regulate internal temperatures to ensure that there is no overheating and hence no damage can occur to the screen.

  1. Outdoor LED Screen Ingress Protection

As different events will have different environments, considering the ingress protection level for LED screen for stage performance is essential.  Ideally, some places require a more robust dust and particle protection feature to function correctly.  Additionally, factor in place of use as screens that will be in direct sunlight needed an added IV protection feature than those that will be used at night.

  1. Outdoor LED Screen Operation Humidity

Finally, consider if the flexible led screen you want to invest in has a high operation humidity level. When used outside, rain, snow and various wet elements can affect the proper functioning of a screen.  Extended operational hours can also lead to the accumulation of humidity from surrounding environs.  Ensuring that you counter check the specifications of a screen before purchase will allow you to choose the most suitable screen for your surroundings.

Conclusion

As seen above, investing in a high-quality stage LED screen takes more than looking at the screen size. To invest in an outdoor LED screen that will serve you for years to come, take into consideration your specific circumstance as an investor. Choosing one that you can easily manage will allow you to extend its useful life and get value for your money.

outdoor LED screen

May 16, 2019 0 comment
0 FacebookTwitterPinterestEmail
OEM and ODM
Manufacturing

OEM and ODM: What’s Is The Core Difference Between Both?

by Stanley March 27, 2019
written by Stanley

OEM (original equipment manufacturer) and ODM (original design manufacture) are two well-known terms in the manufacturing sector. Mostly people got confused with the both of these terms while going through the manufacturing terminologies. There are various OEM/ODM suppliers in the market like gvepower.com who have been manufacturing the OEM and ODM products and supplying it to the market.

How OEM and ODM Products Are Different?

In this article we will be precisely talking about the core differences between both from which most of us are unaware. People are usually mixed-up with the definition and services provided by the both of the manufacturers.

What is OEM?

As said above, OEM stands for original equipment manufacturer. OEM manufacturers are those companies which are supposed to manufacture the products based on the given product design and specifications that are provided by the client. Client is responsible for all the market research and R&D for their product whereas the OEM is responsible to manufacture the product as per the given requirements.

For examples, Apple and Samsung spend millions of dollars on their product line but gets it manufactured by any of the OEM like Foxconn. In this case, the vendor Foxconn is not responsible for the product design rather it is only responsible for manufacturing the product.

What is ODM?

ODMs are the original design manufacturers and the companies that are hired for creating new product design and specifications based on the product idea provided by the client. ODMs may also manufacture the product they have designed and the client gets the final product along with its own branding and name.

OEM and ODM

OEM and ODM

There are various Chinese technology brands that get their products designed from any ODM company and sells it with their own name and branding in the open market. Some of the services that usually an original design manufacturer will provide are as follows:-

  • Outsourced product development
  • Product manufacturing
  • Product designing
  • Product life cycle service etc.
OEM and ODM

OEM and ODM

What Industries Are Being Served By OEM and ODM?

Both of the manufacturers are not limited to just technology sector only rather they have been providing there services for the companies who are dealing in consumer electronics and in the engineering sector as well. OEM/OEM is more common in technology industry because this sector is more design intensive and progression is being made in a very quick manner.

Original design manufacturers and original equipment manufacturers are also providing it seamless services in the industries like fashion, footwear, personal grooming, home appliances, electronics etc.

 

When you are working with an OEM company you have to only provide them with the secret product design you have come up after intense R&D and the OEM will get the product developed whereas the OEM will get the product specifications and design by themselves and you will be provided with the end product with your branding over it, and that’s what you have paid them for.

After reading the whole write-up you should now be clear with the differences between original equipment manufacturer (OEM) and the original design manufacturer (ODM) that how they are different with each other and how they have been provide their services to the industries in the market we have talked about!

March 27, 2019 0 comment
0 FacebookTwitterPinterestEmail
Newer Posts
Older Posts

Copyright All rights reserved.


Back To Top
truesourcesoftware.com
  • Home
  • Technology
  • About Us
  • Contact Us
  • Resource
  • Terms of Service
  • Write for Us